Toray Waterless CTP Plates

Toray Waterless CTP Plate

Toray waterless plates are negative working, non-ablative, thermal plates that utilize traditional printing presses equipped with ink temperature control systems to effectively print on paper, plastics and other substrates without dampening solutions.

Toray waterless plates will produce high-resolution images with 830 nm thermal CTP devices from all major manufacturers enabling printers to reach new heights in quality.

IMPRIMA™ CA
Type IMPRIMA™ CA
Feature Non ablative, negative working, digital thermal waterless printing plate with a wavelength of 830 nm
Application Developed for CD/DVD printers who desire a plate with excellent unbaked durability and chemical resistance for mid level resolutions
Plate base Aluminum
Gauge 0.15 mm, 0.24 mm, 0.30 mm
Available sizes All common plate sizes
Sensitivity 80 - 140mJ/cm2 (Dependent on imager type, configuration and resolution)
Resolution @ 2.540 dpi AM screening: 2-98% @ 175 lpi (70 l/cm)
FM screening: 1–99 % with Staccato 36
Hybrid screening: 1–99 % e.g. Sublima 240
Compatibility with FM screening 36 μm
Daylight resistance Up to 3 hours under standard safe-light conditions
Run length Dependent upon image resolution, press, press chemicals, ink and paper conditions
Processors Toray TWL 650F Waterless Plate processor
Toray TWL 1160F2 Waterless Plate processor
Heights TWP 680/1250 Waterless Plate processor
Könings KTW 653/853 Waterless Plate processor
Processing Step 1 - DP-1 (pre-treatment)
Step 2, 3 - water: 50-80 dH, 20°-25°C
Step 4 - DA-1 (after-treatment)
Pre-treatment temperature 35°C +/- 1°C
Processing speed Toray TWL 650F Waterless Plate processor: 30 - 40 cm/min
Toray TWL 1160F2 Waterless Plate processor: 50 - 80 cm/min
Heights TWP 680/1250 Waterless Plate processor: 50 - 80 cm/min
Könings KTW 653/853 Waterless Plate processor: 50 - 80 cm/min
Dwell time Toray TWL 650F Waterless Plate processor: 60 - 80 sec
Toray TWL 1160F2 Waterless Plate processor: 45 - 72 sec
Heights TWP 680/1250 Waterless Plate processor: 45 - 72 sec
Könings KTW 653/853 Waterless Plate processor: 30 - 48 sec
Plate finisher Not applicable
PDF Technical Data(PDF : 299KB)
IMPRIMA™ CB
Type IMPRIMA™ CB
Feature Non ablative, negative working, digital thermal waterless printing plate with a wavelength of 830 nm
Application High Resolution applications, developed for CD/DVD printers who desire a plate with excellent unbaked durability and chemical resistance
Plate base Aluminum
Gauge 0.15 mm, 0.24 mm, 0.30 mm
Available sizes All common plate sizes
Sensitivity 80 - 140mJ/cm2 (Dependent on imager type, configuration and resolution)
Resolution @ 2.540 dpi AM screening: 2-98% @ 200 lpi (80 l/cm)
FM screening: 1–99 % with Staccato 25
Hybrid screening: 1–99 % e.g. Sublima 240
Compatibility with FM screening 25 μm
Daylight resistance Up to 3 hours under standard safe-light conditions
Run length Dependent upon image resolution, press, press chemicals, ink and paper conditions
Processors Toray TWL 650F Waterless Plate processor
Toray TWL 1160F2 Waterless Plate processor
Heights TWP 680/1250 Waterless Plate processor
Könings KTW 653/853 Waterless Plate processor
Processing Step 1 - DP-1 (pre-treatment)
Step 2, 3 - water: 50-80 dH, 20°-25°C
Step 4 - DA-1 (after-treatment)
Pre-treatment temperature 35°C +/- 1°C
Processing speed Toray TWL 650F Waterless Plate processor: 30 - 40 cm/min.
Toray TWL 1160F2 Waterless Plate processor: 50 - 80 cm/min.
Heights TWP 680/1250 Waterless Plate processor: 50 - 80 cm/min.
Könings KTW 653/853 Waterless Plate processor: 50 - 80 cm/min.
Dwell time Toray TWL 650F Waterless Plate processor: 60 - 80 sec
Toray TWL 1160F2 Waterless Plate processor: 45 - 72 sec
Heights TWP 680/1250 Waterless Plate processor: 45 - 72 sec
Könings KTW 653/853 Waterless Plate processor: 30 - 48 sec
Plate finisher Not applicable
PDF Technical Data(PDF : 299KB)
IMPRIMA™ GA
Type IMPRIMA™ GA
Feature Non ablative, negative working, digital thermal waterless printing plate with a wavelength of 830 nm
Application Developed for waterless printers who desire a plate with excellent unbaked durability and chemical resistance for mid level resolutions
Plate base Aluminum
Gauge 0.15 mm, 0.24 mm, 0.30 mm
Available sizes All common plate sizes
Sensitivity 80 - 140mJ/cm2 (Dependent on imager type, configuration and resolution)
Resolution @ 2.540 dpi AM screening: 2-98% @ 175 lpi (70 l/cm)
FM screening: 1–99 % with Staccato 36
Hybrid screening: 1–99 % e.g. Sublima 240
Compatibility with FM screening 36 μm
Daylight resistance Up to 3 hours under standard safe-light conditions
Run length Up to 150.000
(Dependent upon image resolution, press, press chemicals, ink and paper conditions)
Processors Toray TWL 650F Waterless Plate processor
Toray TWL 1160F2 Waterless Plate processor
Heights TWP 680/1250 Waterless Plate processor
Könings KTW 653/853 Waterless Plate processor
Processing Step 1 - DP-1 (pre-treatment)
Step 2, 3 - water: 50-80 dH, 20°-25°C
Step 4 - DA-1 (after-treatment)
Pre-treatment temperature 35°C +/- 1°C
Processing speed Toray TWL 650F Waterless Plate processor: 30 - 40 cm/min
Toray TWL 1160F2 Waterless Plate processor: 50 - 80 cm/min
Heights TWP 680/1250 Waterless Plate processor: 50 - 80 cm/min
Könings KTW 653/853 Waterless Plate processor: 50 - 80 cm/min
Dwell time Toray TWL 650F Waterless Plate processor: 60 - 80 sec
Toray TWL 1160F2 Waterless Plate processor: 45 - 72 sec
Heights TWP 680/1250 Waterless Plate processor: 45 - 72 sec
Könings KTW 653/853 Waterless Plate processor: 30 - 48 sec
Plate finisher Not applicable
PDF Technical Data(PDF : 300KB)
IMPRIMA™ GB
Type IMPRIMA™ GB
Feature Non ablative, negative working, digital thermal waterless printing plate with a wavelength of 830 nm
Application High Resolution applications:
Versatile Waterless offset printing plate, developed for waterless printers who desire a plate with high resolutions and excellent unbaked durability and chemical resistance
Plate base Aluminum
Gauge 0.15 mm, 0.24 mm, 0.30 mm
Available sizes All common plate sizes
Sensitivity 80 - 140mJ/cm2 (Dependent on imager type, configuration and resolution)
Resolution @ 2.540 dpi AM screening: 2-98% @ 200 lpi (80 l/cm)
FM screening: 1–99 % with Staccato 25
Hybrid screening: 1–99 % e.g. Sublima 240
Compatibility with FM screening 25 μm
Daylight resistance Up to 3 hours under standard safe-light conditions
Run length Up to 100.000
(Dependent upon image resolution, press, press chemicals, ink and paper conditions)
Processors Toray TWL 650F Waterless Plate processor
Toray TWL 1160F2 Waterless Plate processor
Heights TWP 680/1250 Waterless Plate processor
Könings KTW 653/853 Waterless Plate processor
Processing Step 1 - DP-1 (pre-treatment)
Step 2, 3 - water: 50-80 dH, 20°-25°C
Step 4 - DA-1 (after-treatment)
Pre-treatment temperature 35°C +/- 1°C
Processing speed Toray TWL 650F Waterless Plate processor: 30 - 40 cm/min.
Toray TWL 1160F2 Waterless Plate processor: 50 - 80 cm/min.
Heights TWP 680/1250 Waterless Plate processor: 50 - 80 cm/min.
Könings KTW 653/853 Waterless Plate processor: 50 - 80 cm/min.
Dwell time Toray TWL 650F Waterless Plate processor: 60 - 80 sec
Toray TWL 1160F2 Waterless Plate processor: 45 - 72 sec
Heights TWP 680/1250 Waterless Plate processor: 45 - 72 sec
Könings KTW 653/853 Waterless Plate processor: 30 - 48 sec
Plate finisher Not applicable
PDF Technical Data(PDF : 299KB)
IMPRIMA™ GC
Type IMPRIMA™ GC
Feature Non ablative, negative working, digital thermal waterless printing plate with a wavelength of 830 nm
Application Demanding High Resolution applications
Developed for waterless printers who are demanding a plate with outstanding resolutions, excellent unbaked durability and chemical resistance
Plate base Aluminum
Gauge 0.15 mm, 0.24 mm, 0.30 mm
Available sizes All common plate sizes
Sensitivity 80 - 140mJ/cm2 (Dependent on imager type, configuration and resolution)
Resolution @ 2.540 dpi AM screening: 2-98% @ 240 lpi (96 l/cm)
FM screening: 1–99 % with Staccato 20
Hybrid screening: 1–99 % e.g. Sublima 280
Compatibility with FM screening 20 μm
Daylight resistance Up to 3 hours under standard safe-light conditions
Run length Dependent upon image resolution, press, press chemicals, ink and paper conditions
Processors Toray TWL 650F Waterless Plate processor
Toray TWL 1160F2 Waterless Plate processor
Heights TWP 680/1250 Waterless Plate processor
Könings KTW 653/853 Waterless Plate processor
Processing Step 1 - DP-1 (pre-treatment)
Step 2, 3 - water: 50-80 dH, 20°-25°C
Step 4 - DA-1 (after-treatment)
Pre-treatment temperature 35°C +/- 1°C
Processing speed Toray TWL 650F Waterless Plate processor: 30 - 40 cm/min
Toray TWL 1160F2 Waterless Plate processor: 50 - 80 cm/min
Heights TWP 680/1250 Waterless Plate processor: 50 - 80 cm/min
Könings KTW 653/853 Waterless Plate processor: 50 - 80 cm/min
Dwell time Toray TWL 650F Waterless Plate processor: 60 - 80 sec
Toray TWL 1160F2 Waterless Plate processor: 45 - 72 sec
Heights TWP 680/1250 Waterless Plate processor: 45 - 72 sec
Könings KTW 653/853 Waterless Plate processor: 30 - 48 sec
Plate finisher Not applicable
PDF Technical Data(PDF : 299KB)
IMPRIMA™ LA
Type IMPRIMA™ LA
Feature Non ablative, negative working, digital thermal waterless printing plate with a wavelength of 830 nm
Application Developed for labelprinters who desire a plate with excellent unbaked durability and chemical resistance for mid level resolutions
Plate base Aluminum
Gauge 0.15 mm, 0.24 mm, 0.30 mm
Available sizes All common plate sizes
Sensitivity 80 - 140mJ/cm2 (Dependent on imager type, configuration and resolution)
Resolution @ 2.540 dpi AM screening: 2-98% @ 175 lpi (70 l/cm)
FM screening: 1–99 % with Staccato 36
Hybrid screening: 1–99 % e.g. Sublima 240
Compatibility with FM screening 36 μm
Daylight resistance Up to 3 hours under standard safe-light conditions
Run length Dependent upon image resolution, press, press chemicals, ink and paper conditions
Processors Toray TWL 650F Waterless Plate processor
Toray TWL 1160F2 Waterless Plate processor
Heights TWP 680/1250 Waterless Plate processor
Könings KTW 653/853 Waterless Plate processor
Processing Step 1 - DP-1 (pre-treatment)
Step 2, 3 - water: 50-80 dH, 20°-25°C
Step 4 - DA-1 (after-treatment)
Pre-treatment temperature 35°C +/- 1°C
Processing speed Toray TWL 650F Waterless Plate processor: 30 - 40 cm/min
Toray TWL 1160F2 Waterless Plate processor: 50 - 80 cm/min
Heights TWP 680/1250 Waterless Plate processor: 50 - 80 cm/min
Könings KTW 653/853 Waterless Plate processor: 50 - 80 cm/min
Dwell time Toray TWL 650F Waterless Plate processor: 60 - 80 sec
Toray TWL 1160F2 Waterless Plate processor: 45 - 72 sec
Heights TWP 680/1250 Waterless Plate processor: 45 - 72 sec
Könings KTW 653/853 Waterless Plate processor: 30 - 48 sec
Plate finisher Not applicable
PDF Technical Data(PDF : 299KB)
IMPRIMA™ LB
Type IMPRIMA™ LB
Feature Non ablative, negative working, digital thermal waterless printing plate with a wavelength of 830 nm
Application High Resolution applications, developed for labelprinters who desire a plate with excellent unbaked durability and chemical resistance
Plate base Aluminum
Gauge 0.15 mm, 0.24 mm, 0.30 mm
Available sizes All common plate sizes
Sensitivity 80 - 140mJ/cm2 (Dependent on imager type, configuration and resolution)
Resolution @ 2.540 dpi AM screening: 2-98% @ 200 lpi (80 l/cm)
FM screening: 1–99 % with Staccato 25
Hybrid screening: 1–99 % e.g. Sublima 240
Compatibility with FM screening 25 μm
Daylight resistance Up to 3 hours under standard safe-light conditions
Run length Dependent upon image resolution, press, press chemicals, ink and paper conditions
Processors Toray TWL 650F Waterless Plate processor
Toray TWL 1160F2 Waterless Plate processor
Heights TWP 680/1250 Waterless Plate processor
Könings KTW 653/853 Waterless Plate processor
Processing Step 1 - DP-1 (pre-treatment)
Step 2, 3 - water: 50-80 dH, 20°-25°C
Step 4 - DA-1 (after-treatment)
Pre-treatment temperature 35°C +/- 1°C
Processing speed Toray TWL 650F Waterless Plate processor: 30 - 40 cm/min..
Toray TWL 1160F2 Waterless Plate processor: 50 - 80 cm/min..
Heights TWP 680/1250 Waterless Plate processor: 50 - 80 cm/min..
Könings KTW 653/853 Waterless Plate processor: 50 - 80 cm/min..
Dwell time Toray TWL 650F Waterless Plate processor: 60 - 80 sec
Toray TWL 1160F2 Waterless Plate processor: 45 - 72 sec
Heights TWP 680/1250 Waterless Plate processor: 45 - 72 sec
Könings KTW 653/853 Waterless Plate processor: 30 - 48 sec
Plate finisher Not applicable
PDF Technical Data(PDF : 298KB)
IMPRIMA™ SB
Type IMPRIMA™ SB
Feature Non ablative, negative working, digital thermal waterless printing plate with a wavelength of 830 nm
Application High Resolution applications, developed for security printers who desire a plate with excellent unbaked durability and chemical resistance
Plate base Aluminum
Gauge 0.15 mm, 0.24 mm, 0.30 mm
Available sizes All common plate sizes
Sensitivity 80 - 140mJ/cm2 (Dependent on imager type, configuration and resolution)
Resolution @ 2.540 dpi AM screening: 2-98% @ 200 lpi (80 l/cm)
FM screening: 1–99 % with Staccato 25
Hybrid screening: 1–99 % e.g. Sublima 240
Compatibility with FM screening 25 μm
Daylight resistance Up to 3 hours under standard safe-light conditions
Run length Dependent upon image resolution, press, press chemicals, ink and paper conditions
Processors Toray TWL 650F Waterless Plate processor
Toray TWL 1160F2 Waterless Plate processor
Heights TWP 680/1250 Waterless Plate processor
Könings KTW 653/853 Waterless Plate processor
Processing Step 1 - DP-1 (pre-treatment)
Step 2, 3 - water: 50-80 dH, 20°-25°C
Step 4 - DA-1 (after-treatment)
Pre-treatment temperature 35°C +/- 1°C
Processing speed Toray TWL 650F Waterless Plate processor: 30 - 40 cm/min.
Toray TWL 1160F2 Waterless Plate processor: 50 - 80 cm/min.
Heights TWP 680/1250 Waterless Plate processor: 50 - 80 cm/min.
Könings KTW 653/853 Waterless Plate processor: 50 - 80 cm/min.
Dwell time Toray TWL 650F Waterless Plate processor: 60 - 80 sec
Toray TWL 1160F2 Waterless Plate processor: 45 - 72 sec
Heights TWP 680/1250 Waterless Plate processor: 45 - 72 sec
Könings KTW 653/853 Waterless Plate processor: 30 - 48 sec
Plate finisher Not applicable
PDF Technical Data(PDF : 299KB)
IMPRIMA™ SC
Type IMPRIMA™ SC
Feature Non ablative, negative working, digital thermal waterless printing plate with a wavelength of 830 nm
Application Outstanding High Resolution applications, developed for security printers who desire a plate with excellent unbaked durability and chemical resistance
Plate base Aluminum
Gauge 0.15 mm, 0.24 mm, 0.30 mm
Available sizes All common plate sizes
Sensitivity 80 - 140mJ/cm2 (Dependent on imager type, configuration and resolution)
Resolution @ 2.540 dpi AM screening: 2-98% @ 240 lpi (96 l/cm)
FM screening: 1–99 % with Staccato 20
Hybrid screening: 1–99 % e.g. Sublima 280
Compatibility with FM screening 20 μm
Daylight resistance Up to 3 hours under standard safe-light conditions
Run length Dependent upon image resolution, press, press chemicals, ink and paper conditions
Processors Toray TWL 650F Waterless Plate processor
Toray TWL 1160F2 Waterless Plate processor
Heights TWP 680/1250 Waterless Plate processor
Könings KTW 653/853 Waterless Plate processor
Processing Step 1 - DP-1 (pre-treatment)
Step 2, 3 - water: 50-80 dH, 20°-25°C
Step 4 - DA-1 (after-treatment)
Pre-treatment temperature 35°C +/- 1°C
Processing speed Toray TWL 650F Waterless Plate processor: 30 - 40 cm/min.
Toray TWL 1160F2 Waterless Plate processor: 50 - 80 cm/min.
Heights TWP 680/1250 Waterless Plate processor: 50 - 80 cm/min.
Könings KTW 653/853 Waterless Plate processor: 50 - 80 cm/min.
Dwell time Toray TWL 650F Waterless Plate processor: 60 - 80 sec
Toray TWL 1160F2 Waterless Plate processor: 45 - 72 sec
Heights TWP 680/1250 Waterless Plate processor: 45 - 72 sec
Könings KTW 653/853 Waterless Plate processor: 30 - 48 sec
Plate finisher Not applicable
PDF Technical Data(PDF : 298KB)
IMPRIMA™ SD
Type IMPRIMA™ SD
Feature Non ablative, negative working, digital thermal waterless printing plate with a wavelength of 830 nm
Application Security / High Definition printing
Plate base Aluminum
Gauge 0.30 mm
Available sizes All common plate sizes
Sensitivity 80 - 140mJ/cm2 (Dependent on imager type, configuration and resolution)
Resolution AM screening: 1-98% @ 450 lpi (180 l/cm)
FM screening: 1–99 % with Staccato 10
Hybrid screening: 1–99 % e.g. Sublima 340
Compatibility with FM screening ≤ 10 μm
Daylight resistance Up to 3 hours under standard safe-light conditions
Run length Dependent upon image resolution, press, press chemicals, ink and paper conditions
Processors Toray TWL 650F Waterless Plate processor
Toray TWL 1160F2 Waterless Plate processor
Heights TWP 680/1250 Waterless Plate processor
Könings KTW 653/853 Waterless Plate processor
Processing Step 1 - DP-1 (pre-treatment)
Step 2, 3 - water: 50-80 dH, 20°-25°C
Step 4 - DA-1 (after-treatment)
Pre-treatment temperature 35°C +/- 1°C
Processing speed 30-80 cm/min.
Dwell time Dip to Nip: 45 - 90 sec. (Dependent on processor type)
Plate finisher Not applicable
PDF Technical Data(PDF : 435KB)
IMPRIMA™ WA
Type IMPRIMA™ WA
Feature Non ablative, negative working, digital thermal waterless printing plate with a wavelength of 830 nm
Application Coldset / Heatset web offset applications
Plate base Aluminum
Gauge 0.30 mm
Available sizes All common plate sizes
Sensitivity 80 - 90mJ/cm2 (Dependent on imager type, configuration and resolution)
Resolution AM screening: 2-98% @ 175 lpi (70 l/cm)
FM screening: 1–99 % with Staccato 36
Hybrid screening: 1–99 % e.g. Sublima 210
Compatibility with FM screening 36 μm
Daylight resistance Up to 3 hours under standard safe-light conditions
Run length Up to 180.000 - 230.000
(Dependent upon image resolution, press, press chemicals, ink and paper conditions)
Processors Könings MW 863 S Waterless plate processor
Könings MW 863 HS Waterless plate processor
Heights TWP 1250 News Waterless plate processor
Processing Step 1 - DP-1 (pre-treatment)
Step 2, 3 - water: 50-80 dH, 20°-25°C
Step 4 - DA-1 (after-treatment)
Pre-treatment temperature 35°C +/- 1°C
Processing speed Könings MW 863 S Waterless plate processor: 100 - 120 cm/min..
Könings MW 863 HS Waterless plate processor: 140 - 180 cm/min..
Heights TWP 1250 News Waterless plate processor: 140 - 180 cm/min..
Dwell time 40-50 sec.
Plate finisher Not applicable
PDF Technical Data(PDF : 298KB)
IMPRIMA™ WB
Type IMPRIMA™ WB
Feature Non ablative, negative working, digital thermal waterless printing plate with a wavelength of 830 nm
Application High Quality, medium-runlenth Coldset / Heatset web offset applications
Plate base Aluminum
Gauge 0.30 mm
Available sizes All common plate sizes
Sensitivity 80 - 90mJ/cm2 (Dependent on imager type, configuration and resolution)
Resolution @ 2.540 dpi AM screening: 2-98% @ 200 lpi (80 l/cm)
FM screening: 1–99 % with Staccato 25
Hybrid screening: 1–99 % e.g. Sublima 240
Compatibility with FM screening 25 μm
Daylight resistance Up to 3 hours under standard safe-light conditions
Run length Up to 150.000
(Dependent upon image resolution, press, press chemicals, ink and paper conditions)
Processors Könings MW 863 S Waterless plate processor
Könings MW 863 HS Waterless plate processor
Heights TWP 1250 News Waterless plate processor
Processing Step 1 - DP-1 (pre-treatment)
Step 2, 3 - water: 50-80 dH, 20°-25°C
Step 4 - DA-1 (after-treatment)
Pre-treatment temperature 35°C +/- 1°C
Processing speed Könings MW 863 S Waterless plate processor: 100 - 120 cm/min..
Könings MW 863 HS Waterless plate processor: 140 - 180 cm/min..
Heights TWP 1250 News Waterless plate processor: 140 - 180 cm/min..
Dwell time 40-50 sec.
Plate finisher Not applicable
PDF Technical Data(PDF : 299KB)